Converters · FREE

Area Converter (Marla, Kanal, Sq Ft, Acre)

Convert common area units. Processing for supported tools happens locally in your browser.

Enter a value and choose units.

About Area Converter

Use this browser-based utility for everyday tasks. Review output before relying on it and retain a copy of important originals.

Read the Area Converter guide →

About Area Converter

Area conversion helps compare floor plans, land measurements, and project surfaces expressed in different units. Enter the area and choose the source and target units.

How to use Area Converter

  1. Enter the area value.
  2. Choose the current unit.
  3. Choose the unit to convert to.
  4. Select Convert to see the result.
  5. Use Swap units to reverse the conversion.

Common mistakes

Do not mix the marla standards in one calculation. Do not confuse a square foot with a foot: a plot of 30 by 60 feet is 1,800 square feet, not 90. Remember that a gaz in this tool means a square yard (an area), not a length of one yard. Round only at the end, because rounding each step makes small errors that grow on large plots. Finally, keep the unit next to every number you write down so that nobody reads marla as square feet.

Frequently asked questions

How many square feet are in one marla?

In the common standard used in Punjab, one marla is 272.25 square feet, which is about 25.29 square metres. Some places use a different marla, so check your local land record for a legal sale or purchase.

How many marla are in one kanal?

One kanal is 20 marla. With the 272.25 sq ft marla that is 5,445 square feet, or about 505.86 square metres.

How do I convert square feet to marla?

Divide the area in square feet by 272.25. For example 1,361.25 sq ft is 5 marla. The tool does this for you, in both directions.

How many square yards are in one marla?

With the 272.25 square foot marla, one marla is 30.25 square yards (272.25 divided by 9). The tool shows this when you convert marla to square yards (gaz).

More Converters tools

Want more detail, examples and answers to common questions? Read the Area Converter guide.

About Area Converter

Area conversion helps compare floor plans, land measurements, and project surfaces expressed in different units. Enter the area and choose the source and target units.

How to use Area Converter

  1. Enter the area value.
  2. Choose the current unit.
  3. Choose the unit to convert to.
  4. Select Convert to see the result.
  5. Use Swap units to reverse the conversion.

Common mistakes

Do not mix the marla standards in one calculation. Do not confuse a square foot with a foot: a plot of 30 by 60 feet is 1,800 square feet, not 90. Remember that a gaz in this tool means a square yard (an area), not a length of one yard. Round only at the end, because rounding each step makes small errors that grow on large plots. Finally, keep the unit next to every number you write down so that nobody reads marla as square feet.

Frequently asked questions

How many square feet are in one marla?

In the common standard used in Punjab, one marla is 272.25 square feet, which is about 25.29 square metres. Some places use a different marla, so check your local land record for a legal sale or purchase.

How many marla are in one kanal?

One kanal is 20 marla. With the 272.25 sq ft marla that is 5,445 square feet, or about 505.86 square metres.

How do I convert square feet to marla?

Divide the area in square feet by 272.25. For example 1,361.25 sq ft is 5 marla. The tool does this for you, in both directions.

How many square yards are in one marla?

With the 272.25 square foot marla, one marla is 30.25 square yards (272.25 divided by 9). The tool shows this when you convert marla to square yards (gaz).

More Converters tools

Want more detail, examples and answers to common questions? Read the Area Converter guide.